Water softener valve Autotrol 255/760 Metered/Time

Water softener valve Autotrol 255/760 Metered/Time - injector and flow regulator 8" W./O. mixing and connectors

Valve included of:
- Valve.
- Upper bayonet screen basket.
- Tube with bottom screen basket.
- Air-Check.
- Air-check Jaco female elbow PP OD Tube - NPT thread 3/8" x 1/4".
- Union elbow OD Tube - OD Tube 3/8"
- Brine valve (3/8")
- Ballast.
- By-pass W./O. connettors.

To purchase with every valve:
- 15010101-017 Mixing inox Logix
- 15010101 Autotrol 255 - 3/4" or 1" bypass kit adaptors.

Recommended for automatic systems for residential water softening; valve body in plastic material Noryl, NSF listing; valves sealing rubber for use in cold water, material listing NSF; operating flow rate Kv = 3.4; backwash flow rate equal to 22,7 lpm with delta p 1.72 bar, range = 5 to resin capacity of 75 liters, available with the following series LOGIX timers (see data 01-03-02-IT):
or 740 C - ET Electronic lap;
or 760 C - ET Electronic volume;
or 742 C programmable electronic chronometric;
or 762 C Programmable electronic volumetric

complete with power outlet 12/230V - 50Hz European plug; Bottle connection Threaded: 2 ½ "- 8 AN male. * Connect the brine line Threaded ¼ "NPT male. * Diameter of diffuser tube 1.05 "(= 27mm)

RECOMMENDED OPERATING CONDITIONS
Pressure 1.38 ÷ 8.27 bar. * Water temperature 2°C to 38°C

For codes 15010101-036 and 15010101-037(point 17) the ball of point 21, should be removed, see exploded.