Sodabar 3-Way Reverse Osmosis 90L/h – Ambient, Cold & Carbonated Water

Direct Reverse Osmosis System 90L/h – 3-Way

Key Features:

• Reverse osmosis water purification system with a capacity of 90L/h.

• Cold, ambient, and carbonated water options.

• Digital temperature controller for water, reaching the set temperature in 1.5 minutes.

• Electronic control board to optimize performance, monitor operation, and manage maintenance.

• Automatic flushing valve for membrane cleaning.

• Anti-flood sensor to block incoming water in case of leaks.

• TDS (Total Dissolved Solids) regulator to customize mineral levels in the water, compliant with national regulations.

• Ideal for installation under a kitchen sink or in tight spaces without causing additional heat buildup.

• Includes installation kit and 3-way faucet.

Advantages:

• Reliable and easy to install.

• Low operating cost with no chemicals used.

• Effectively removes impurities and contaminants from water.

• Made in Italy, certified to D.M.25/2012 and D.M.174/2004 standards.

Safety and Maintenance:

• Water stop system to prevent leaks.

• Electronic control panel to oversee all operational phases.

• Auto-flushing for membranes after prolonged inactivity.

Technical Specifications:

• Filters: Sediment filter (5 micron) and coconut carbon block filter (5 micron).

• Membranes: 2x 200 GPD.

• Pump: Brass pump, 300L/h, water cooling.

• Membrane cleaning: Automatic 15-second flushing.

• Operating pressure: 1-4 bar.

• Operating temperature: 3°C to 14°C.

• Power supply: 220-240V, 50/60Hz.

• Power consumption: 50W.

• Purification efficiency: >95%.

Connections:

• Power supply: Italian L-type plug, 220-230V.

• Water and CO2 inlet: Quick connect DMfit 3/8" and 1/4".

• Water outlet: DMfit 1/4" pass-through fitting.

Included Accessories (Code: 050021-002) – Ready for Installation:

• Installation Kit

• Tubing

•  3043 – 3-way faucet, 1/4" chrome.

•  Carbon-Tech – CO2 pressure regulator for single-use cylinders, 90° knob, M11x1.

•  Adapter extension for CO2 pressure regulator, M11x1 to W21.8x1/14".

• Straight terminal, Ø tube, BSPT 1/4" x 1/8" thread.

•  Single-use CO2 cylinder E290 (0.600g) for water coolers.

System Usage and Maintenance Notes:

• The reverse osmosis system is not a water potabilizer. It works only if installed with potable water (municipal or pre-treated well water). Do not use with microbiologically dangerous or unknown water quality unless adequately disinfected before the system.

• Maintenance:

  • Replace filters when the capacity is exhausted or when the flow is too slow. Recommended every 6 months, at least annually.

  • Replace membranes when the TDS (Total Dissolved Solids) remains high, or the flow is too slow. Recommended every 24 months.