2-5 DAYS DELIVERY
Sale
h2oitaly
Ionicore Water Filters
€10,35
In Stock
Sold out
Add to wishlist
Added to wishlist
Add to compare
Added to compare
Categories: Ionicore
100% ORIGINAL AND QUALITY
- Description
- Shipping information
- Reviews
Ultrafiltration is a system which separates water particles between reverse osmosis and microfiltration. It can be described as synthetic membrane filtration which is used to separate various macromolecules, colloids and bacteria. It operates at low pressures in comparison to reverse osmosis, almost without causing any alterations to the water mineralization. The Ionicore UF ultrafiltration membrane is produced with polysulphone capillaries, allowing water to pass from outside to inside without rejection, with nominal filtration at 0,01 microns and a maximum recommended flow of 4 lt/min. The average useful life of the system is 12.000 litres or one year, if water used is dechlorinated and with pre-filter. The recommended work pressure for the membrane is between 0,5 and 8,2 bars. The Ionicore UF ultrafiltration membrane applications are numerous, ideal for water cooler dispensers, reverse osmosis and microfiltration systems. Ready to use, has no need of housing.
- Micron rating: 0,01 micron
- Max pressure: 120psi (8,2bar)
- Burst pressure: 500psi (34,4bar)
- Max temperature: 113°F (45°C)
- Flow rate: (1gpm) 4lt./min.
- Service life: (3.174gal.) 12.000lt.
- Dimensions DxH (mm.): 62,2x280(mm.) - 2,5”x11"(In.)
- Activation: it's advisable to run water through membrane at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing.
- Membrane change: When capacity is reached, or when flow comes too slow (precipitates under 0,7bar/10psi), every 12 months.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used with disinfected water that may contain filterable cysts. All systems must be maintained according to producer instructions.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
- Micron rating: 0,01 micron
- Max pressure: 120psi (8,2bar)
- Burst pressure: 500psi (34,4bar)
- Max temperature: 113°F (45°C)
- Flow rate: (1gpm) 4lt./min.
- Service life: (3.174gal.) 12.000lt.
- Dimensions DxH (mm.): 62,2x280(mm.) - 2,5”x11"(In.)
- Activation: it's advisable to run water through membrane at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing.
- Membrane change: When capacity is reached, or when flow comes too slow (precipitates under 0,7bar/10psi), every 12 months.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used with disinfected water that may contain filterable cysts. All systems must be maintained according to producer instructions.
Nota bene: The contaminants or other substances removed or reduced by this drinking water system are not necessarily in your water.
We ship with BRT Express Courier, guaranteeing delivery within 2-5 days throughout Italy.
